NR1520 OWNERS MANUAL ATTENTION! DO NOT USE THE MACHINE WITHOUT HAVING READ THE INSTRUCTIONS CAREFULLY NaceCare Solutio
10UPON COMPLETION OF WORK DISASSEMBLY OF BRUSH/PAD DRIVER To remove the abrasive pad, Lay the machine on the floor so it is resting on the handl
11TROUBLE SHOOTING GUIDE THE MACHINE DOES NOT CLEAN EFFICIENTLY (IT FLUTTERS OR SWINGS) If the machine has been stored in the upright position wi
ASSEMBLY INSTRUCTIONS ASSEMBLY OF HANDLE (NR1520) Put the handle in vertical position, place its support on the four holes and insert all the
3 SUMMARY SUMMARY ...
4 Upon delivery of the machine When the machine is received, ensure to check that all components are in the box and that the machine has not been
5TECHNICAL DATA Unit NR1520 Washing width INCH 21.25” Machine length INCH 24” Machine height (motor) INCH 11.8” Machine height (handle) INCH 50”
6MACHINE PREPARATION PREPARING THE MACHINE FOR FIRST USE Upon delivery of the machine, please ensure that the owner’s manual is read thoroughly.
7MACHINE PREPARATION WARNING: Use only high-speed pads. Using any other pads other than ones recommended for high speed could be dangerous and c
8GENERAL SAFETY RULES Any use of the machine other than the specified uses different from the instructions written here or recommended by NaceCare
9WORK PREPARATION MANOEUVRE OF THE MACHINE PREPARATION:MANOEUVERING THE MACHINE By pulling the lever (A) lower the handle until the arms of the
Comentarios a estos manuales