OWNERS MANUAL ST60BT 1205 Britannia Road East, Mississauga, ON L4W 1C7 Phone: 1-800-387-3210 Fax: 1-800-709-2896
10 OPERATING THE MACHINE WORKING POSITION Figure 10 The user operates while sitting, having manual lever and pedal controls on the instrument
11 OPERATING THE MACHINE Figure 13 a. Side brush pedal b. Flap pedal c. Suction closing /filter shaker starting lever. Figure 14 a
12 USAGE Figure 15 1. Make sure that the parking brake is released. Figure 16 1. Make sure that the suction is opened Figur
13 USAGE BATTERY MACHINE Figure 19 1. Select the direction of driving with the button (a) on the instrument board. 2. Adjust the machine s
14 USAGE Figure 23 Push the flap lifting pedal when there is bulky debris to collect in order to allow its entry and collection into the cent
15 MAINTENANCE PROCEDURES ATTENTION : Before any adjustment and/or maintenance procedure always switch off the machine. ATTENTION: disc
16 MAINTENANCE PROCEDURES ADJUSTMENT OF SIDE BRUSH Figure 27 The regulation of the brush pressure on the floor can be made by adjusting the scr
17 TROUBLE SHOOTING GUIDE THE CENTRAL BROOM DOES NOT CLEAN 1. The broom is worn or improperly positioned: adjust its position or, if necessar
18 SCRAPPING OF THE MACHINE The machine is composed of: iron materials, plastics, rubber. The battery-operated version of the machine is als
2SUMMARY SUMMARY...
3 On delivery of the machine When the machine is delivered to the customer, an immediate check must be performed to ensure all the materia
4 TECHNICAL DATA DUSTER M is a ride-on sweeping machine. The ‘B’ model is an electrically operated machine powered by traction batteries, used f
5SYMBOLS Filter shaker Central broom rotation (automatic/manual traction) Side brush Open book symbol. Points out to read manua
6PREPARATION OF THE MACHINE UNPACKING THE MACHINE Figure 2 The machine is delivered packed on a pallet. To move it use a fork truck or a pul
7PREPARATION OF THE MACHINE SLIDING THE MACHINE DOWN OFF THE PALLET Figure 5 1. Close the bonnet and pull the machine forward such that it s
8PREPARATION OF THE MACHINE BATTERIES RECHARGING In order to avoid damage to the batteries, it is necessary to avoid their complete discharge. A
9GENERAL SAFETY REGULATIONS The rules below must be followed carefully in order to avoid injury to the operator and damage to the machine r Rea
Comentarios a estos manuales